So I have taught myself Flowcode, and am proud of my accomplishments. So much so, I would like to do a workshop. I use an UNO and a display with 5 pushbuttons.
So I am looking for examples using Flowcode. I would like to use commomly availible sensors, such as angle sensors, temp sensors and an RTC for time sensitive event control.
Maybe some LED arrays for a scroling screen.
Does anyone have well documented working examples I could use? Thanks in advance.
Leading a workshop for Flowcode
Moderator: Benj
-
- Valued Contributor
- Posts: 1188
- Joined: Wed May 31, 2017 11:57 am
- Has thanked: 70 times
- Been thanked: 439 times
- Contact:
Re: Leading a workshop for Flowcode
Good luck.
You're most welcome to use any of the code snippets I've posted over the last couple of years - some of them are even commented
Martin
You're most welcome to use any of the code snippets I've posted over the last couple of years - some of them are even commented
Martin
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Leading a workshop for Flowcode
Hello,
Sounds like an excellent plan
We have some bits here that might be useful.
https://www.matrixtsl.com/flowcode/support/
Namely the getting started guide and the intro to microcontrollers programming.
There are some E-blocks related examples here too which may be useful.
https://www.matrixtsl.com/eblocks/resources/
The wiki components section is also a good resource for examples.
https://www.matrixtsl.com/wiki/index.ph ... Components
I probably have more so bear with me and I'll see what I can dig out.
Sounds like an excellent plan
We have some bits here that might be useful.
https://www.matrixtsl.com/flowcode/support/
Namely the getting started guide and the intro to microcontrollers programming.
There are some E-blocks related examples here too which may be useful.
https://www.matrixtsl.com/eblocks/resources/
The wiki components section is also a good resource for examples.
https://www.matrixtsl.com/wiki/index.ph ... Components
I probably have more so bear with me and I'll see what I can dig out.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 159
- Joined: Thu Jul 01, 2010 1:57 am
- Has thanked: 23 times
- Been thanked: 16 times
- Contact:
Re: Leading a workshop for Flowcode
I understand the basics. Can I teach it? I hope so.
Does anyone have a good implememtation of an accelerometer, or angle sensor. ADXL335 / GY-61.
Another wish item is a graphical display, such as 2.8" TFT Touch shield by SeedStudio.com.
I will look to acertain that it is supported by Flowcode 8.
I see 4 choices for a GLCD display in Flowcode 8. Can I get a brand for one of the 4 choices?
Does anyone have a good implememtation of an accelerometer, or angle sensor. ADXL335 / GY-61.
Another wish item is a graphical display, such as 2.8" TFT Touch shield by SeedStudio.com.
I will look to acertain that it is supported by Flowcode 8.
I see 4 choices for a GLCD display in Flowcode 8. Can I get a brand for one of the 4 choices?
Last edited by EtsDriver on Sun Jan 26, 2020 2:04 pm, edited 1 time in total.
Reason: Shimmed some messages together for better readablility. You can easily edit your old post using the edit post button!
Reason: Shimmed some messages together for better readablility. You can easily edit your old post using the edit post button!