Hello,
Is it possible to interface the Nokia 6100 with the flowcode 4 gLCD component?
Here is the lcd: http://www.sparkfun.com/products/569
Thanks!
Nokia 6100
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Nokia 6100
Hello,
That looks very much like the LCD we used to supply on the EB043 v1 board so yes I would think the display should be compatible. I seem to remember there were about three variations of the display made by different manufacturers but they should all work with the component code. There may be a possibility that the contrast is inverted on your display. I think this is a simple command change to fix if this is the case.
That looks very much like the LCD we used to supply on the EB043 v1 board so yes I would think the display should be compatible. I seem to remember there were about three variations of the display made by different manufacturers but they should all work with the component code. There may be a possibility that the contrast is inverted on your display. I think this is a simple command change to fix if this is the case.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel