Flowcode V5.4 minor fixes

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 5.
To post in this forum you must have a registered copy of Flowcode 5 or higher.

Moderator: Benj

Post Reply
User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Flowcode V5.4 minor fixes

Post by Enamul »

Hi,
I thought it would be good if all users in the forum link any bug found in the current version of V5 which will help MM guys to update that in next release easily and all the users can easily notice what are the corrections needed before wasting hours.

PIC18f4580.FCD fix..
need to modify to..

Code: Select all

Initialise="adcon1 = 0x0F;\ncr_bit(trise,PSPMODE);\nccp1con=0x00;\neccp1con=0x00;\ncmcon=0x07;\n"
or can download from the post..
http://www.matrixmultimedia.com/mmforum ... 46&t=11000

ECIO fcd fix for RXINT..
http://www.matrixmultimedia.com/mmforum ... 46&t=11213

PIC16f887 MCLR/RE3
http://www.matrixmultimedia.com/mmforum ... 46&t=11203

PIC18F47J53 TMR1, TMR3 & TMR5 FCD
http://www.matrixmultimedia.com/mmforum ... 46&t=11167

CAN compile error
http://www.matrixmultimedia.com/mmforum ... 46&t=11126

Chip specific ADC error
http://www.matrixmultimedia.com/mmforum ... 47&t=10108

New FCD added for PIC16F1518
http://www.matrixmultimedia.com/mmforum ... 167#p38825

Float array parameter passing problem need to be fixed..
http://www.matrixmultimedia.com/mmforum ... 46&t=11209

v5 Beta FAT16 component SDHC
http://www.matrixmultimedia.com/mmforum ... 9&start=25

I2C CAL fix (I2C 2)
http://www.matrixmultimedia.com/mmforum ... 46&t=11167

FCD correction for PWM1 in PIC18fxxK80
http://www.matrixmultimedia.com/mmforum ... 717#p39717

I might have missed some already fixed bugs. Please add in the post so that other users will be benefited.

Please don't post anything in this thread that you feel bug but need to be verified..Mainly those fixed or those which detected and need to be fixed in next release.
Enamul
University of Nottingham
enamul4mm@gmail.com

jgu1
Posts: 1203
Joined: Tue Oct 06, 2009 9:39 am
Contact:

Re: Flowcode V5.4 minor fixes

Post by jgu1 »

Hi Enamuel!

Finally :D Very nice Thank´s

Best regard

Jorgen

User avatar
DavidA
Matrix Staff
Posts: 1066
Joined: Fri Apr 23, 2010 2:18 pm
Location: Matrix Multimedia Ltd
Contact:

Re: Flowcode V5.4 minor fixes

Post by DavidA »

Thanks Enamul!

I shall sticky this.

Mark
Posts: 209
Joined: Thu Oct 19, 2006 11:46 am
Location: Bakewell, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Mark »

And PIC18F47J53 further tweak on I2C Port 2.

http://www.matrixmultimedia.com/mmforum ... 167#p39603

Thanks Enamul for the original post.

Mark
Go with the Flow.

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Enamul
University of Nottingham
enamul4mm@gmail.com

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Enamul
University of Nottingham
enamul4mm@gmail.com

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

PIC18F46K80 ADC Config Adcon1 fix....
http://www.matrixmultimedia.com/mmforum ... 46&t=11364
Enamul
University of Nottingham
enamul4mm@gmail.com

wayne millard
Posts: 230
Joined: Thu May 31, 2007 2:18 pm
Contact:

Re: Flowcode V5.4 minor fixes

Post by wayne millard »

Hi Team,

Will there be any update soon to v5.4 to cover all the changes and tweeks?

Thanks,
Wayne

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Hello,
PIC18f4x80 full port input fix..
http://www.matrixmultimedia.com/mmforum ... 46&t=11404
Enamul
University of Nottingham
enamul4mm@gmail.com

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Suggestion:
I feel that would be really good if we have that in next release..
http://www.matrixmultimedia.com/mmforum ... 48&t=11448
Enamul
University of Nottingham
enamul4mm@gmail.com

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

FCD correction for PIC18f2585 and PIC18f2680
http://www.matrixmultimedia.com/mmforum ... 858#p41858
Enamul
University of Nottingham
enamul4mm@gmail.com

DannyBerry
Posts: 29
Joined: Tue Aug 30, 2011 9:20 pm
Contact:

Re: Flowcode V5.4 minor fixes

Post by DannyBerry »

I tryed to use this Pic12f683 chip and didn't see all of the available timers....Is there an updated FCD for PIC12f683

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Hi
I have checked the datasheet and FCD file and it seems that the device has 3 timer (TIMER0,1,2) which is enabled in FCD. Can you tell in different thread what else you are looking for?
Enamul
University of Nottingham
enamul4mm@gmail.com

DannyBerry
Posts: 29
Joined: Tue Aug 30, 2011 9:20 pm
Contact:

Re: Flowcode V5.4 minor fixes

Post by DannyBerry »

Can you tell in different thread what else you are looking for?
I only see tmr0...I would like to change to tmr2. See what I mean? :)
Attachments
12f683_current.jpg
(152.14 KiB) Downloaded 8745 times

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Enamul
University of Nottingham
enamul4mm@gmail.com

User avatar
Enamul
Posts: 1772
Joined: Mon Mar 05, 2012 11:34 pm
Location: Nottingham, UK
Contact:

Re: Flowcode V5.4 minor fixes

Post by Enamul »

Enamul
University of Nottingham
enamul4mm@gmail.com

Post Reply