ECIO Labview-VB interfacing

[QMESAR]

Hi All

I have purchased and ECIO40P16 in the user manual page 8 it states that there is a DLL and some example application code to interface the ECIO to Labview(I normally did this over the Serial) however i would like to see how Matrix does this with the DLL probably this would be useful feature for me in future ,Where do I find this as on the ECIO web page I could not locate this examples and DLL

Anny help is highly appreciated

[QMESAR]

Guys another question I do also not find this free online course in controls
Please help me to find it

Regards

[Benj]

Hello,

Here are the files for creating the ECIO slave device and some Labview / VB examples. I would recommend using the ECIO Prog tool to load the .hex file firmware onto the ECIO just to avoid any Flowcode version related issues.

The .hex file is located here in the archive "PC Interface Examples\PC Interface Recovery Firmware\Flowcode Source File"

PC Interface Examples.zip

(1.87 MiB) Downloaded 281 times

The ECIO course can be found here: http://www.matrixtsl.com/resources/getr ... php?id=328

[QMESAR]

Benj

Thank you very much ,i appreciate your help

Regards