FC7 Compiler XC8 Ver 1.41 to XC8 Ver 1.45

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
johnsondav
Posts: 188
Joined: Thu Jun 28, 2012 7:29 pm
Location: Durham
Has thanked: 86 times
Been thanked: 186 times
Contact:

FC7 Compiler XC8 Ver 1.41 to XC8 Ver 1.45

Post by johnsondav »

Hi Everyone

I have been looking at upgrading to FC8. Just wanted to compare what's new. However, the first difference I have noticed is that Microchip has a new compiler V1.45.


Q. Why am I not allowed to use this newer version with FC7?

This is the message that I get:- ERROR: Can not launch process: The requested operation requires elevation.

Target folder: C:\Users\johns\DOCUME~1\PROJEC~1\RFPIRD~1\DETECT~1
Source name: C:\Users\johns\Documents\Project Files\RF PIR detector Kit\Detector RF Module\Detector Module Ver1.fcfx
Title:
Description:
Device: PIC.16F.16F88
Generated by: Flowcode v7.3.0.7
Date: Monday, November 19, 2018 19:50:44
Users: 1
Registered to: johnsondav
Licence key: XXXXXXXXX
http://www.matrixtsl.com
Launching the compiler...
C:\Program Files (x86)\Microchip\xc8\v1.45\Uninstall-xc8-v1.45.exe --chip=16F88 "Detector Module Ver1.c" --MSGDISABLE=359,1273,1388
ERROR: Can not launch process: The requested operation requires elevation.


C:\Program Files (x86)\Microchip\xc8\v1.45\Uninstall-xc8-v1.45.exe reported error code -1



FINISHED
The compiler has been installed as follows:

- C:\Program Files (x86)\Microchip\xc8\v1.45\Uninstall-xc8-v1.45.exe

- --chip=$(chip) "$(target).c" --MSGDISABLE=359,1273,1388

Any ideas anyone! :-(

Dave

gdt
Posts: 71
Joined: Thu Aug 10, 2017 2:04 pm
Has thanked: 25 times
Been thanked: 36 times
Contact:

Re: FC7 Compiler XC8 Ver 1.41 to XC8 Ver 1.45

Post by gdt »

Hello Dave,
when you select the version 1.45 in the "Project Options" I guess you pick up the wrong file. It should point to xc8.exe.
In your log I see "Uninstall-xc8-v1.45.exe".

Regards
Giuseppe

johnsondav
Posts: 188
Joined: Thu Jun 28, 2012 7:29 pm
Location: Durham
Has thanked: 86 times
Been thanked: 186 times
Contact:

Re: FC7 Compiler XC8 Ver 1.41 to XC8 Ver 1.45

Post by johnsondav »

Hi Giuseppe

Thank you. I will be forever in your debt.

Dave

gdt
Posts: 71
Joined: Thu Aug 10, 2017 2:04 pm
Has thanked: 25 times
Been thanked: 36 times
Contact:

Re: FC7 Compiler XC8 Ver 1.41 to XC8 Ver 1.45

Post by gdt »

Come on, this was an easy one!!!

Cheers.
Giuseppe

johnsondav
Posts: 188
Joined: Thu Jun 28, 2012 7:29 pm
Location: Durham
Has thanked: 86 times
Been thanked: 186 times
Contact:

Re: FC7 Compiler XC8 Ver 1.41 to XC8 Ver 1.45

Post by johnsondav »

Yep. I have had a laugh at myself. I’m not going to delete the tread because it serves to everyone, check and check again. I didn’t, as I was in a hurry before my free lecience ran out, to do some bench mark testing between FC7 vs FC8, before upgrading. Well, I’ve upgraded to FC8. :lol:

There’s much to like about FC8 but, and I will need to do much more testing, the changes to programming options makes FC8 a much more powerful program development tool. A very positive step forward.

Well done to the Matrix team.

Post Reply