Hello
I'm trying to send data over a USB connection.
The microcontroller is an 18F25J50
The settings are without quartz 48MHz
in an endless loop I send data via a USB serial connection to the PC
When I compile the program I get the following error message:
C:\Program Files (x86)\Flowcode\Common\Compilers\pic\batch\pic_xc8_comp.bat 18F26J50 "D:\PR6751~1\" "Flowcode12"
D:\PR6751~1>C:\PROGRA~2\Flowcode\Common\COMPIL~1\pic\batch\..\bin\xc8.exe --chip=18F26J50 "Flowcode12.c" --MSGDISABLE=359,1273,1388 --FLOAT=32 --DOUBLE=32
Microchip MPLAB XC8 C Compiler (Free Mode) V1.45
Build date: Nov 15 2017
Part Support Version: 1.45
Copyright (C) 2017 Microchip Technology Inc.
License type: Node Configuration
(100) unterminated #if[n][def] block from line 904
(908) exit status = 1
(908) exit status = 1
Error returned from [xc8.exe]
C:\Program Files (x86)\Flowcode\Common\Compilers\pic\batch\pic_xc8_comp.bat Hat den Fehlercode 1 gemeldet
Autoclose turned off
BEENDET
Felermeldung 18F25J50 and USB
Moderator: Benj
-
- Posts: 89
- Joined: Wed Aug 31, 2016 4:48 pm
- Been thanked: 4 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Felermeldung 18F25J50 and USB
Hello,
Thanks for letting us know. I believe I have fixed this problem now and pushed it to the update system.
Let me know how you get on.
Thanks for letting us know. I believe I have fixed this problem now and pushed it to the update system.
Let me know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 89
- Joined: Wed Aug 31, 2016 4:48 pm
- Been thanked: 4 times
- Contact:
Re: Felermeldung 18F25J50 and USB
Hello Benj,
Thank you very much for your quick help. With the new update the USB interface works again.
Thank you very much for your quick help. With the new update the USB interface works again.