E-blocks2 mikroBUS adapter
The E-blocks2 mikroBUS adapter board provides a simple way of connecting a Click board (TM) from MikroElektronika using the MikroBus connection and layout standard.
Click board is a trademark of MikroElektronika d.o.o.
E-blocks2 mikroBUS adapter board provides a simple way of connecting a Click board (TM) from MikroElektronika using the MikroBus connection and layout standard. Most of the Mikrobus pins are wired to allow for direct peripheral support from the E-blocks upstream controller IC.
The exceptions to this are the Interrupt and Analogue pins which are exposed via turned pin sockets allowing you to wire these signals to any of the free pins of your E-blocks controller.
Protection is provided on the board to ensure that 5V and 3V3 devices can work together seamlessly without causing any damage.
E-blocks >E-blocks2
If using this board with First Generation upstream E-blocks, then you will need an E-blocks upstream to E-blocks2 downstream connector.
Click board is a trademark of MikroElektronika d.o.o.
Resource | Version | Type |
---|---|---|
E-blocks2 Datasheet | 1 | |