E-Blocks 2 PIC Multiprogrammer

SKU#: BL0080

The 8-bit PIC Multi-programmer can be used with various programming languages including Assembly, C and Flowcode.  To program the PIC on the board, a free tool called mLoader is available.

The board will program a wide range of 18, 28 and 40 pin PIC microcontroller devices from the PIC16F and PIC18F series.  The board presents all port pins collected together as E-Blocks 2 sockets and takes power from an external power supply or from the micro USB port.

A powerful 40 pin PIC16F18877 device is shipped with the multi-programmer.

If using this board with First Generation downstream E-blocks, then you will need an E-Blocks 2 upstream to E-Blocks downstream connector.

New features in E-blocks2 include:

  • Power now routed via the connector – no more flying leads
  • Board auto ID functionality
  • Flowcode automatic project set up
  • Smaller footprint using up to date surface mount technology
  • Over current resettable fuse protection

Ghost

The E-blocks2 board is compatible with Ghost technology.  Using the board with Flowcode allows the use of the advanced Ghost debugging features including in circuit debugging, real time pin monitoring and bus decoding.

 

Pictures are a representation of the product and correct at the time of uploading. Occasionally there may be changes to equipment for supplier or development reasons which may not be reflected. Please check the bill of materials before purchase to confirm the contents that you will receive.

£113.00 Ex VAT