PLC adaptor - mounting bracket
The PLC Adapter range of products by Matrix TSL has been primarily designed to allow users to connect the Automatics range of products to their 3rd party PLC of choice. It acts as an interface between the PLC and Automatics hardware, allowing the standard 4mm cables used on Automatics to be connected to the screw terminals on your PLC.
The HP6785 mounting bracket features an industry standard 50mm DIN rail, which can be configured to 3 heights, allowing users to mount their PLC and adapters for ease of use. Designed with a 45 degrees angle it offers both excellent visibility and access to the PLC and adapter modules, while not compromising the Automatics hardware. The design of the mounting bracket still enables users to mount the Automatics manifold and power supply components on the rear of the platform.
Although designed to allow PLCs to interface with our Automatics range of pneumatics learning resources, these PLC add-ons can be used in any situation where students are connecting PLCs to other equipment and the tutor wants to minimise potential damage from errors in wiring to the PLC.
Photographs are for illustrative purposes only. Product is one din rail mounted on the bracket - Automatics panel not included.
Industrial PLCs not supplied by Matrix TSL.
|PLC Adapter Datasheet||1|