Component: Serial EEPROM (24C32) (Storage)
| Author | Matrix TSL |
| Version | 2.0 (Release) |
| Category | Storage |
Contents
Serial EEPROM (24C32) component
Serial (I2C) EEPROM component for 24C32 Can be added to a MIAC project to give read and write access to the internal non-volatile memory device (if fitted, depending upon model).
Examples
No additional examples
Downloadable macro reference
Read
Read and return the value of the EEPROM at the given address
Parameters
- UINT address
Return value
Write
Write the given data value to the EEPROM at the given address
Parameters
- UINT address
- BYTE data
Return value
- This call does not return a value
Simulation macro reference
This component does not contain any simulation macros
Property reference
Device Address
This property is of type Fixed list of ints and can be referenced with the variable name DEVICE_ADDRESS.
Device address bits, these must match the address pins on the EEPROM IC.
Channel
This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::CHANNEL.
Channel selection
Baud Select
This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::BAUD_LIST.
Baud rate option selector
Baud Rate
This property is of type Signed integer and can be referenced with the variable name cal_i2c1::BAUD.
Baud rate to be used
Stop Delay
This property is of type True or false and can be referenced with the variable name cal_i2c1::StopDel.
On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not
a 10ms delay between an I2C stop event and the next I2C start event.
Most modern microcontrollers will not have a problem so this property can be disabled to speed up the
I2C communications.
SDA
This property is of type Single digital pin and can be referenced with the variable name cal_i2c1::SDA.
Pin used for SDA (data signal)
SDA Remap Pin
This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::SDAPins.
No additional information
SCL
This property is of type Single digital pin and can be referenced with the variable name cal_i2c1::SCL.
Pin used for SCL (clock signal)
SCL Remap Pin
This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::SCLPins.
No additional information
Scope Traces
This property is of type True or false and can be referenced with the variable name cal_i2c1::ScopeTraces.
Selects if the component pin connections are automatically generated on the data recorder window or not.
Yes: Automatically add the component pins to a group on the data recorder which will reflect the sim data during simultion.
No: Do not show the pin signals on the data recorder window.
Console Data
This property is of type True or false and can be referenced with the variable name cal_i2c1::ConsoleData.
Selects if the console data is automatically generated or not
Injector
This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::Injector.
No additional information
