Component: Serial EEPROM (24C16) (Storage)

From Flowcode Help
Jump to: navigation, search


Author Matrix TSL
Version 2.0 (Release)
Category Storage


Contents

Image Serial EEPROM (24C16) component

Serial (I2C) EEPROM component for 24C01 to 24C16


Examples

No additional examples


Downloadable macro reference

Read

Read and return the value of the EEPROM at the given address

Parameters

UINT address


Return value

BYTE


Write

Write the given data value to the EEPROM at the given address

Parameters

UINT address
BYTE data


Return value

This call does not return a value


Simulation macro reference

This component does not contain any simulation macros


Property reference

Device Address

This property is of type Fixed list of ints and can be referenced with the variable name DEVICE_ADDRESS.

Device address bits, these must match the address pins on the EEPROM IC.

Channel

This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::CHANNEL.

Channel selection

SDA

This property is of type Single digital pin and can be referenced with the variable name cal_i2c1::SDA.

Pin used for SDA (data signal)

SDA Remap Pin

This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::SDAPins.

No additional information


SCL

This property is of type Single digital pin and can be referenced with the variable name cal_i2c1::SCL.

Pin used for SCL (clock signal)

SCL Remap Pin

This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::SCLPins.

No additional information


Baud Select

This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::BAUD_LIST.

Baud rate option selector

Baud Rate

This property is of type Signed integer and can be referenced with the variable name cal_i2c1::BAUD.

Baud rate to be used

Stop Delay

This property is of type True or false and can be referenced with the variable name cal_i2c1::StopDel.

On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not

a 10ms delay between an I2C stop event and the next I2C start event.


Most modern microcontrollers will not have a problem so this property can be disabled to speed up the

I2C communications.

Scope Traces

This property is of type True or false and can be referenced with the variable name cal_i2c1::ScopeTraces.

Selects if the component pin connections are automatically generated on the data recorder window or not.

Yes: Automatically add the component pins to a group on the data recorder which will reflect the sim data during simultion.

No: Do not show the pin signals on the data recorder window.

Console Data

This property is of type True or false and can be referenced with the variable name cal_i2c1::ConsoleData.

Selects if the console data is automatically generated or not

Injector

This property is of type Fixed list of ints and can be referenced with the variable name cal_i2c1::Injector.

No additional information

Personal tools