I wondered whether it was possible to make a termostaat with the Formula Flowcode buggy.
Here I would connect a temperature sensor (DS1820), use an LCD display for monitoring the temperature and use a relay to switch a heat component.
Something like this http://www.youtube.com/watch?v=r_D0ORrx ... re=related buth then with the formula flowcode buggy
Making a thermostaat with the buggy
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Making a thermostaat with the buggy
Hello,
This is technically possible but you may not be able to use the buggy as a robot as you would have to use some of the I/O lines in your application.
This is technically possible but you may not be able to use the buggy as a robot as you would have to use some of the I/O lines in your application.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel