Just to eliminate any possible software related problems, is it possible you can link me to, or attach for me the latest/correct versions of any drivers, and software required for the latest EBlocks board, EB-006-00-9 aka EB006v9 please?
I'm specifically looking for the latest version of mLoader, the only version I found for download on your site apears to be from 2011, which is a little worrying for a device that became available in february 2014.
But I'd also like the correct driver too, since the device was not auto-detected when I plugged it into windows 7 64bit, and I'm not sure if the driver I am using is the right one.
EB-006-00-9 more problems.
-
bobingabout
- Posts: 45
- Joined: Thu Dec 06, 2012 3:41 pm
- Has thanked: 4 times
- Been thanked: 8 times
- Contact:
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB-006-00-9 more problems.
Hello,
I posted the latest driver here for you: http://www.matrixmultimedia.com/mmforum ... 612#p57603
I'll ask David to post up the latest mLoader, I think he might be tinkering with it at the moment.
I posted the latest driver here for you: http://www.matrixmultimedia.com/mmforum ... 612#p57603
I'll ask David to post up the latest mLoader, I think he might be tinkering with it at the moment.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
bobingabout
- Posts: 45
- Joined: Thu Dec 06, 2012 3:41 pm
- Has thanked: 4 times
- Been thanked: 8 times
- Contact:
Re: EB-006-00-9 more problems.
I posted in the other topic with screenshots.
My guess is that the version of mLoader I am using doesn't recognise the E006 V9 board.
My guess is that the version of mLoader I am using doesn't recognise the E006 V9 board.