I have 2 off EB006 programmer boards that are V6. I am using Flowcode 5 and Itried to enable the ICD function but I just get a message saying the programmer board needs V7. Can I upgrade the programmer board software to version 7 so as to allow the ICD to function
Regards
Tim
Can Iupgrade an EB006 V6 to V7 to enable ICD
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Can Iupgrade an EB006 V6 to V7 to enable ICD
Hi Tim,
Sorry the EB006 v7 and onwards has upgraded hardware and firmware to help support the ghost features.
A v6 board cannot be upgraded to a v7 board.
From memory the various revisions brought in.
v7 - ICD support & PICkit header
v8 - Charge Pump - Reprogramming without requiring 12V supply
v9 - ICT support & 3V3 operation support
The Flowkit 2 device will allow you to add ICD and ICT functionality to an EB006 but it might simply be easier to get one of the newer v9 EB006 boards.
Sorry the EB006 v7 and onwards has upgraded hardware and firmware to help support the ghost features.
A v6 board cannot be upgraded to a v7 board.
From memory the various revisions brought in.
v7 - ICD support & PICkit header
v8 - Charge Pump - Reprogramming without requiring 12V supply
v9 - ICT support & 3V3 operation support
The Flowkit 2 device will allow you to add ICD and ICT functionality to an EB006 but it might simply be easier to get one of the newer v9 EB006 boards.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Can Iupgrade an EB006 V6 to V7 to enable ICD
Thanks I didn't want to spend the money till i'd checked