I just checked the new E-blocks2 BL0080 PIC multi-programmer with the BL0114 combo board.
I compiled a small fcf just to check the 4X20 LCD display of BL0114.
With the stocked P16F18877 the code is normally compiled without errors and the LCD works as in the code.
I replaced the P16F18877 with a P16F1937, after with a P16F1939 and later with a P16F1789 and in all cases, during compiling, I received this message from the compiler:
Code: Select all
File sent with 1 warnings:
1: Flash memory not verified - may be due to code protect
Here the simple fcf: Thanks for any help