Hi,
I am looking for the configuration words for the following pics
PIC16F877A
PIC16F73
Can anybody point me in the right direction please
PIC16F877A Datasheet
http://ww1.microchip.com/downloads/en/D ... 39582b.pdf
PIC16F73 Datasheet
http://ww1.microchip.com/downloads/en/D ... 30325b.pdf
Many Thanks
steve
configuration word wanted
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: configuration word wanted
Hi Steve
See section 14.1 of the 16F877A datasheet.
Should be a similar section for the 16F73 device.
See section 14.1 of the 16F877A datasheet.
Should be a similar section for the 16F73 device.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: configuration word wanted
i found that my mplab software has a part that generates config words,
looking at page 90 on the PIC16F73 chip
the following settings where set as
oscillator - xt
watchdog - off
powerup reset - on
brownout - off
code proctect - off
the following returned a value of 3FB1
can anybody explain how this value was obtained as i don't understand it ..
steve
looking at page 90 on the PIC16F73 chip
the following settings where set as
oscillator - xt
watchdog - off
powerup reset - on
brownout - off
code proctect - off
the following returned a value of 3FB1
can anybody explain how this value was obtained as i don't understand it ..
steve
Success always occurs in private and failure in full view.