my question is, do i need to use a 4.7 k pull up resistor or can i use something more or less than 4.7k, reason being im sitting at home and dont have the right resistor but have 9k resistor sitting here. dont feel like goin to radioshack
thanks
one wire pull up question
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: one wire pull up question
Hello
I think you can get away with a 10K so a 9K resistor should be fine.
I think you can get away with a 10K so a 9K resistor should be fine.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel