Hi
Any advise on changing LCD.c so I can use another display I have to use Batron BT 21603V. any help is good. can for instance I make a new LCD component and have them both in Flowcode.
Changing PCD component
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Changing PCD component
Hello
I've not come across that display but if you have the display datasheet then it should be fairl;y easy to follow and create your own C driver. You can use one of the Custom components to create your 3rd party LCD driver. There are lots of posts on the forums regarding how to acheive this.
I've not come across that display but if you have the display datasheet then it should be fairl;y easy to follow and create your own C driver. You can use one of the Custom components to create your 3rd party LCD driver. There are lots of posts on the forums regarding how to acheive this.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Changing PCD component
Benj
I am sorry turns out it is circuite error my fault all is working fine now. Funny I have checked it 3 or four times but still missed it. short between tracks on circuite bo
I am sorry turns out it is circuite error my fault all is working fine now. Funny I have checked it 3 or four times but still missed it. short between tracks on circuite bo