Hi, I am trying to use six ADC channels on a 18F2580 however the flow code program (I have tried 3 & 4, both full versions) does not follow the seqence i.e. ADC0-4,ADC8-10 instead it goes ADC0-7 ?
I tried to edit the fcd file but it did not seem to have an effect. Any help would be most welcome
Thanks for your time
regards
Rob
ADC 18F2580
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: ADC 18F2580
Hello Rob,
This updated v3 FCD file now fixes the misnumbered ADC channels.
To fix the FCD file I changed the ADCPins count from 8 to 11 and changed the ADCPins so that the unused channels are set to 0. I will fix the problem in the FCD source so the next release of Flowcode will have all the correct FCDs for these devices.
This updated v3 FCD file now fixes the misnumbered ADC channels.
To fix the FCD file I changed the ADCPins count from 8 to 11 and changed the ADCPins so that the unused channels are set to 0. I will fix the problem in the FCD source so the next release of Flowcode will have all the correct FCDs for these devices.
- Attachments
-
- 18F2580.fcd
- (7.14 KiB) Downloaded 403 times
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: ADC 18F2580
Benji,
The file worked on flowcode 3 and I inserted the changes into the flowcode 4 fcd and now that seems to work fine as well,
thank you for the speedy reply
regards
Rob
The file worked on flowcode 3 and I inserted the changes into the flowcode 4 fcd and now that seems to work fine as well,
thank you for the speedy reply
regards
Rob