Hi Ben,
I have added MIAC as a slave to the pc and it works great, however I want to know if I can communicate to MIAC via USB as a slave but retaining some functionality, as in case of crash of the computer or USB port frozen, that the MIAC can continue to do basic things and keeping internal data.
If that is no possible to do with USB port could it be done via RS232 port?
Also, in case of the slave mode, do you have examples made with Visual Studio and is there any template for that purpose?
Thanks.
Roberto Iglesias
MIAC Slave Autonomous
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: MIAC Slave Autonomous
Hello Roberto,
Which version of Flowcode are you using?
If your using the MIAC USB slave which is part of Flowcode v6 then yes you can tweak the firmware source to allow you to do whatever you like.
The MIAC USB Slave firmware source can be found here: http://www.matrixmultimedia.com/wiki/in ... 51d675a9e7
Let us know how your getting on.
Which version of Flowcode are you using?
If your using the MIAC USB slave which is part of Flowcode v6 then yes you can tweak the firmware source to allow you to do whatever you like.
The MIAC USB Slave firmware source can be found here: http://www.matrixmultimedia.com/wiki/in ... 51d675a9e7
Let us know how your getting on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: MIAC Slave Autonomous
Hi Ben,
Thanks for your reply.
I am using Flowcode 6 and so far is the best version released.
Regarding the slave mode for Miac, if I understood correctly I can change the firmware so that I can have the unit to perform as I need, is that correct?
On the other hand is there a way to control as well other modules attached to Miac as slave, or Miac as slave works by itself?
Thanks.
Regards,
Roberto Iglesias
Thanks for your reply.
I am using Flowcode 6 and so far is the best version released.
Regarding the slave mode for Miac, if I understood correctly I can change the firmware so that I can have the unit to perform as I need, is that correct?
On the other hand is there a way to control as well other modules attached to Miac as slave, or Miac as slave works by itself?
Thanks.
Regards,
Roberto Iglesias