In simulation it would be verry handy to have an overview of the state of inputs and outputs.
I think of a picture of the processor with all ports on it and lights on if a input or output is active high and lights off when input or output is active low.
It would be something like a logic analiser in the simulation.
Perhaps with as extra info the value of a port in DEC, HEX of BIN.
Overview of inputs and outputs
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Overview of inputs and outputs
Hello,
Many thanks for the suggestion. Maybe adding some kind of peripheral usage would also be good i.e. which timers are being used etc.
Many thanks for the suggestion. Maybe adding some kind of peripheral usage would also be good i.e. which timers are being used etc.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel