Hi all,
I am busy looking at a project that will need a RTC module. Has anyone used one that works well with FC5? If so, please could you send me the part number etc. No need to re-invent the wheel.
Many thanks in advance.
Real Time Clock Module
Moderator: Benj
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Real Time Clock Module
Hello,
I've had good results with the DS1307 and there might be some v5 projects already on the forum based on this module you can use.
If not then i'm sure someone will have a demo program you can use.
I've had good results with the DS1307 and there might be some v5 projects already on the forum based on this module you can use.
If not then i'm sure someone will have a demo program you can use.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
jgu1
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Real Time Clock Module
Hi!
Try to take a look here: http://www.matrixtsl.com/mmforums/viewt ... 307#p40253 lot of stuff.
Very good example from John (Again).
Best regad
Jorgen..
Try to take a look here: http://www.matrixtsl.com/mmforums/viewt ... 307#p40253 lot of stuff.
Very good example from John (Again).
Best regad
Jorgen..