When I compile to hex where is the checksum?
When I program I still do not see the checksum?
I need to have our program preloaded into the microchip but need the checksum for the board stuffing house.
MPLAB Check Sum
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: MPLAB Check Sum
Hello,
If you download and install the latest MPLABX and include the IPE software during the installation. Then run the IPE software and load your .hex file then it will calculate the checksum for you.
If you download and install the latest MPLABX and include the IPE software during the installation. Then run the IPE software and load your .hex file then it will calculate the checksum for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: MPLAB Check Sum
Hi Benj, Thank you very much for the information. It worked perfectly.
Have a good one. Howard
Have a good one. Howard