hi ;
i tried to write a program with FLOWCODE V3 in order to display on LCD 2×16 ,at the begening every thing works good ,LCD display correctly, so i decide to make the project on a real board ,i tried to make connections with PORT B and LCD 2×16 ,the fact is that FLOWCODE V3 say that DATA1,DATA2,DATA3,DATA4,RS,validation ; are connecting to BIT0,BIT1,BIT2,BIT3,BIT4,BIT5 but in reality the LCD countains 16 pins(D0 D1 D2 D3 D4 D5 D6 D7 E RW RS Vss Vdd Vee) so i'm confused a little bit to make connections correctly ,
LCD CONNECTIONS
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: LCD CONNECTIONS
Hello,
The EB005 datasheet contains a schematic of how the LCD is connected.
Here are the Flowcode pins and their connections to the LCD.
Data1 -> D4
Data2 -> D5
Data3 -> D6
Data4 -> D7
RS -> RS
E -> RS
GND -> RW
The EB005 datasheet contains a schematic of how the LCD is connected.
Here are the Flowcode pins and their connections to the LCD.
Data1 -> D4
Data2 -> D5
Data3 -> D6
Data4 -> D7
RS -> RS
E -> RS
GND -> RW
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel