Good day all I would like to know if it is possibly to have a stateless pin. In other words, I can program a pin to go high or low, can I program a pin to have no state, sort of disconnect.
Ondra
Stateless Pin?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Stateless Pin?
Hello Ondra
Yes you can put the I/O pin into high impedance state by using the input icon. If you wish to do this for a single pin then you can use the input icon in single pin mode. You will have to supply a variable for this but you do not have to use it in your program.
Yes you can put the I/O pin into high impedance state by using the input icon. If you wish to do this for a single pin then you can use the input icon in single pin mode. You will have to supply a variable for this but you do not have to use it in your program.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel