Hi 2 all,
I want to simulate MAX7219-21 in Flowcode 6 ,if any forum user has done before, plz explain how can i do that.
i will be thankful
7219 Simulation
Moderator: Benj
- sysprofessional
- Posts: 54
- Joined: Sat Oct 26, 2013 7:16 pm
- Has thanked: 28 times
- Been thanked: 4 times
- Contact:
7219 Simulation
Last edited by sysprofessional on Wed Apr 06, 2016 12:38 pm, edited 1 time in total.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: 7219 Simulation
Hello,
It's an SPI based device so I would create the sim by creating an injector component. These are not as straight forward as they potentially could be but they do work.
Here is some info on comms injector components.
http://www.matrixtsl.com/wiki/index.php ... a_Injector
And here is some more info on how to create your own.
http://www.matrixtsl.com/mmforums/viewt ... 58&t=12727
It's an SPI based device so I would create the sim by creating an injector component. These are not as straight forward as they potentially could be but they do work.
Here is some info on comms injector components.
http://www.matrixtsl.com/wiki/index.php ... a_Injector
And here is some more info on how to create your own.
http://www.matrixtsl.com/mmforums/viewt ... 58&t=12727
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel