DATA pin of ICD cannot be changed on ATMEL chips
Moderator: Benj
-
- Posts: 444
- Joined: Tue Apr 15, 2014 4:19 pm
- Location: Kajaani, Finland
- Has thanked: 345 times
- Been thanked: 227 times
- Contact:
DATA pin of ICD cannot be changed on ATMEL chips
The ICD data pin defaults to A port when i try to change it (AtMega 32, 168, 328, 16, 128 etc). Is there any workaround for this problem? I have PCB wich i desinged to use the PG4 and PG3 for ICD. If it defaults to port A, i cannot even change it back to B port.
- Attachments
-
- Sieppaa.PNG
- (82 KiB) Downloaded 1268 times
Ill just keep the good work up!
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: DATA pin of ICD cannot be changed on ATMEL chips
Hello,
Thanks for posting the bug, I have added it to the list.
For now you can workaround the issue by changing the defaults in the FCDX definition file.
There is a section right at the end of the file that looks like this.
I have created a modified ATMEGA128 FCDX file for you using pins G3 and G4. The file needs to be placed into the "C:\Program Files (x86)\Flowcode 6\FCD\AVR" folder before starting Flowcode.
Thanks for posting the bug, I have added it to the list.
For now you can workaround the issue by changing the defaults in the FCDX definition file.
There is a section right at the end of the file that looks like this.
You should be able to assign your correct ICD pins using this.<test >
<icd >
<clock port='1' pin='6' />
<data port='1' pin='7' />
</icd>
</test>
I have created a modified ATMEGA128 FCDX file for you using pins G3 and G4. The file needs to be placed into the "C:\Program Files (x86)\Flowcode 6\FCD\AVR" folder before starting Flowcode.
- Attachments
-
- ATMEGA128.fcdx
- (25.68 KiB) Downloaded 191 times
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel