In addition to the problems encountered when trying to program the chip, post here...
http://www.matrixtsl.com/mmforums/viewt ... 54&t=16360
I run into compiling errors when trying to enable Ghost in my project. I am attaching JPGs and project file to document.
This project tries to interface a Sendyne high precision current sensor to CAN bus. With little effort it may become a UART to CAN bridge.
Other minor issues noticed were in Build\Project Options\Configure:
0x300000 bit 2 =1 should read LF-INTOSC in High-power mode during Sleep not High Security Code Protection Enable
0x300005 bit 7 (47) = 1 should read MCLR Enabled, RE3 Disabled not MCLR Enabled, RG5 Disabled
Ghost not working with PIC18F26K80
Moderator: Benj
-
- Posts: 37
- Joined: Sun Mar 30, 2014 9:27 pm
- Has thanked: 10 times
- Been thanked: 10 times
- Contact:
Ghost not working with PIC18F26K80
- Attachments
-
- CANtoUARTbridge.fcfx
- (13.53 KiB) Downloaded 175 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Ghost not working with PIC18F26K80
Hello,
Thanks for letting us know of the issue,
I have fixed the config problem in all the K80 definition files. Here is the 26K80 update for you and needs to be placed here: "C:\Program Files (x86)\Flowcode 6\FCD\PIC".
I have also hopefully fixed the ICD compile error you are receiving. The following files need to be placed here: "C:\Program Files (x86)\Flowcode 6\CAL\PIC"
Let me know how you get on.
Thanks for letting us know of the issue,
I have fixed the config problem in all the K80 definition files. Here is the 26K80 update for you and needs to be placed here: "C:\Program Files (x86)\Flowcode 6\FCD\PIC".
I have also hopefully fixed the ICD compile error you are receiving. The following files need to be placed here: "C:\Program Files (x86)\Flowcode 6\CAL\PIC"
Let me know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel