Hello. Can you please help with the ADC on a PIC32MM. Any getbyte, getint or getvoltage component makro is not working.
The program stops there. I downloaded the sample / demo program called ADCByte.fcfx. This program runs fine on 8-bit devices like the PIC18F4620.
I have been able to run other sample project on the PIC32MM just fine
PIC32MM ADC
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PIC32MM ADC
Hello,
Thanks for letting us know. I have had a look and think I may have found the problem.
Firstly please can you update the PIC32MM definition files. The archive below needs to be extracted into the "Flowcode 7/FCD/PIC32" folder overwriting the files there.
Next you also need to copy the file below into your "Flowcode 7/CAL/PIC32" folder.
Restart Flowcode if you have it open and hopefully the ADC will now work as expected.
Let us know how you get on.
Thanks for letting us know. I have had a look and think I may have found the problem.
Firstly please can you update the PIC32MM definition files. The archive below needs to be extracted into the "Flowcode 7/FCD/PIC32" folder overwriting the files there.
Next you also need to copy the file below into your "Flowcode 7/CAL/PIC32" folder.
Restart Flowcode if you have it open and hopefully the ADC will now work as expected.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel