Hello,
my project under Flowcode V7 before latest update 24/08/2017 works very well: it use 18F2550, HID and nrf24l01.
After i have download update of 24/08/2017 and install it compiled ok but stopped to work: i suspect that is a problem with
HID because Ben work around it a couple of time with some patch (see my topic in Flowcode V7).
Reinstalling Flowcode and patch it with update before 24/08/2017 it work again.
Thanks
Problem - bug after update Flowcode V7 with latest update 24/08/2017
Moderator: Benj
-
- Posts: 56
- Joined: Mon Aug 11, 2014 3:57 pm
- Has thanked: 18 times
- Been thanked: 17 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Problem - bug after update Flowcode V7 with latest update 24/08/2017
Hello,
Thanks for letting us know of the problem. I'll investigate the HID files in the update and make sure I've not made a mistake.
Thanks for letting us know of the problem. I'll investigate the HID files in the update and make sure I've not made a mistake.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 56
- Joined: Mon Aug 11, 2014 3:57 pm
- Has thanked: 18 times
- Been thanked: 17 times
- Contact:
Re: Problem - bug after update Flowcode V7 with latest update 24/08/2017
Hello Benj,
i am not sure that is a problem with HID or nrf24 or Pic18f2550 but something in last update; without it all work perfect also in hardware.
In any case thank again.
i am not sure that is a problem with HID or nrf24 or Pic18f2550 but something in last update; without it all work perfect also in hardware.
In any case thank again.