Hi MM!
It would be nice if it was possible to make an autodetect device in Arduino and pic16 deviceces. Just like in PPP for pic.
Inform the port number and if it is an Uno, Mega and R3 ect.
Br
Jorgen
Device detect!
Moderator: Benj
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Device detect!
Hi Jorgen,
Do you mean when starting a new project having some kind of auto detect target button to auto select the right device. It's a nice idea but I can see this being tricky to pull off. Especially if you have multiple things connected. Also taking into account things like Arduino which can come from a variety of legit and none legit sources. I'll add it to the list as one to ponder.
PIC devices on our EB006 and EB064 boards do auto detect already via mLoader so working this into Flowcode might not be too hard.
Do you mean when starting a new project having some kind of auto detect target button to auto select the right device. It's a nice idea but I can see this being tricky to pull off. Especially if you have multiple things connected. Also taking into account things like Arduino which can come from a variety of legit and none legit sources. I'll add it to the list as one to ponder.
PIC devices on our EB006 and EB064 boards do auto detect already via mLoader so working this into Flowcode might not be too hard.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel