Hi Ben,
I am using a 32MX270F256B and when using the CAL UART, if the baud rate is updated the comms will stop. If the update baud icon is disabled the comms works fine. I have attached the test program that i have been using.
I have also installed the patches you have created that takes care of all the timing and peripheral issues too.
Thanks
Zane
CAL UART comms stops if the baud rate is updated
Moderator: Benj
-
- Flowcode v5 User
- Posts: 199
- Joined: Thu Sep 10, 2009 10:57 pm
- Location: New Zealand
- Has thanked: 93 times
- Been thanked: 76 times
- Contact:
CAL UART comms stops if the baud rate is updated
- Attachments
-
- Flowcode1.fcfx
- (10.52 KiB) Downloaded 297 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: CAL UART comms stops if the baud rate is updated
Hi Zane,
Could you please try the attached CAL file?
Thanks
Leigh
Could you please try the attached CAL file?
Thanks
Leigh
-
- Flowcode v5 User
- Posts: 199
- Joined: Thu Sep 10, 2009 10:57 pm
- Location: New Zealand
- Has thanked: 93 times
- Been thanked: 76 times
- Contact:
Re: CAL UART comms stops if the baud rate is updated
Hi Leigh,
I have tried this but it has not been successful.
Thanks Zane
I have tried this but it has not been successful.
Thanks Zane
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: CAL UART comms stops if the baud rate is updated
OK. Thanks for testing. I'll stick this PIC32 issue on Ben's pile
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: CAL UART comms stops if the baud rate is updated
Thanks for letting us know of the problem.
I have replicated it and have found a fix.
Simply copy the attached file into your "Flowcode 7/CAL/PIC32BIT" folder and the problem should be resolved.
Let us know how you get on.
I have replicated it and have found a fix.
Simply copy the attached file into your "Flowcode 7/CAL/PIC32BIT" folder and the problem should be resolved.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Flowcode v5 User
- Posts: 199
- Joined: Thu Sep 10, 2009 10:57 pm
- Location: New Zealand
- Has thanked: 93 times
- Been thanked: 76 times
- Contact:
Re: CAL UART comms stops if the baud rate is updated
Hi Ben,
Thanks for the update i will try it later on this week.
Thanks
Zane
Thanks for the update i will try it later on this week.
Thanks
Zane
-
- Flowcode v5 User
- Posts: 199
- Joined: Thu Sep 10, 2009 10:57 pm
- Location: New Zealand
- Has thanked: 93 times
- Been thanked: 76 times
- Contact:
Re: CAL UART comms stops if the baud rate is updated
Thanks Ben, your magic worked a treat, it is functioning as expected now