Eblocks 1 and Flowcode 8 (MIDI project)

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

dereckn
Posts: 6
Joined: Sat Aug 25, 2012 7:28 pm
Contact:

Eblocks 1 and Flowcode 8 (MIDI project)

Postby dereckn » Sat Sep 14, 2019 3:47 am

Hello all, I have not used flowcode in a long time, however I have flowcode 8 and an old Eblock MIDI setup. I seem to remember that there was an example program, but I am unable to find it. I am really looking for a basic MIDI project file/example for flowcode. Is the old MIDI example project still available? Are there any issues using the old project in flowcode 8 with the older Eblock board?
Thanks

User avatar
Benj
Matrix Staff
Posts: 14422
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4495 times
Been thanked: 4178 times
Contact:

Re: Eblocks 1 and Flowcode 8 (MIDI project)

Postby Benj » Wed Sep 18, 2019 9:53 am

Hello,

There's an example here which may be of help.
https://www.matrixtsl.com/wiki/index.php?title=Component:_MIDI_(Comms:_System)

The Eblock board should work fine with Flowcode 8.

dereckn
Posts: 6
Joined: Sat Aug 25, 2012 7:28 pm
Contact:

Re: Eblocks 1 and Flowcode 8 (MIDI project)

Postby dereckn » Mon Sep 30, 2019 7:51 am

Ben,
Sorry for the very slow response. Thanks for the provided input. I was able to find the original link I was looking for.
https://www.matrixtsl.com/webshop/e-blo ... rface.html
I will look thru the test programs. The main thing I am looking for is setting up a PIC to process incoming program changes and CC's to determine what SysEx messages I want to send out.
Thanks again.
Dereck