Chinese version SSD1306 working perfectly in software mode.
Vdd is 3V3
In Channel mode, both data and clock remain near VDD, Never drops to 0V
Using Internal osc set to 48MHz, I2C 100KHz and MCLR as port.
I2C Channel mode not working PIC18F27K40
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
I2C Channel mode not working PIC18F27K40
- Attachments
-
- Miniture gLCD IC2 18F27kK40.fcfx
- (14.38 KiB) Downloaded 137 times
Martin
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: I2C Channel mode not working PIC18F27K40
Hi Martin,
Thanks for the spot, I'll get this fix pushed to the update system as soon as possible.
For now here you go.
Thanks for the spot, I'll get this fix pushed to the update system as soon as possible.
For now here you go.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: I2C Channel mode not working PIC18F27K40
Perfect thank you.
Confirmed working with channels 1 & 2 (Remapping ok) and software mode.
Confirmed working with channels 1 & 2 (Remapping ok) and software mode.
Martin