Hi,
I'm having trouble with the gLCD.
I think my (gLCD) component connections aren't right so I'll just attach the flowcode file and log file.
I'm just trying to write some text on the gLCD...
Btw, does the backlight light up when you connect the 12V to the VPWR or do you first need to init the gLCD ?
My power supply is 12V5 approx. and the jumper of the EB-58 is set to B.
I'm using a 16F877A with a 4MHz osc.
Thanks for helping me
Rgds,
Nicolas Lopez F.
gLCD EB-058
-
- Posts: 594
- Joined: Thu Sep 17, 2009 7:52 am
- Location: Belgium
- Has thanked: 63 times
- Been thanked: 102 times
- Contact:
gLCD EB-058
- Attachments
-
- Flowcode1.msg.txt
- log file
- (3.04 KiB) Downloaded 384 times
-
- Flowcode1.fcf
- flowcode file
- (6.5 KiB) Downloaded 399 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: gLCD EB-058
Hello Nicolas.
First of all you may need to update the component C code file for the new gLCD. To do this save the following file into your Flowcode v4\Components directory and overwrite the existing file when prompted.
Once you have done this you will need to plug the E-block into PortC for a 16F877A.
The attached program should then work correctly.
First of all you may need to update the component C code file for the new gLCD. To do this save the following file into your Flowcode v4\Components directory and overwrite the existing file when prompted.
Once you have done this you will need to plug the E-block into PortC for a 16F877A.
The attached program should then work correctly.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 594
- Joined: Thu Sep 17, 2009 7:52 am
- Location: Belgium
- Has thanked: 63 times
- Been thanked: 102 times
- Contact: