Hi everyone and best wishes for the new year
I have a problem with the last Flowcode release for PIC and the SPI component with a 18F4431. Flowcode compiles well but nothing happen on the SPI port.
I try to setup the expert configuration box because It's possible to mux SPI with portC or portD but without any success.
SPI works well with 18F4420 but I need 18F4431 features.
Anybody has an idea ?
Thank you
Mathy
SPI don't work with 18F4431
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: SPI don't work with 18F4431
Hello Mathy,
Hmm thats a strange one. Have you tried using the port as an output before enabling the SPI? Does the chip do other things eg are you sure it is running correctly etc.
Hmm thats a strange one. Have you tried using the port as an output before enabling the SPI? Does the chip do other things eg are you sure it is running correctly etc.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel