Hi at all, I just started with Flowcode 6 and the Multiprogrammer EB-006-00-9, supplied by usb. Power LED is on. when I try to Programm the device, i get the following Error.
What is wrong? Using the external supply makes no difference.
EB 006 Version 9
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB 006 Version 9
Hello,
Please can you confirm that all the following jumpers are connected horizontally and also let us know what positions they are in?
J15 Target Voltage
J11 Voltage Source
J12-J14 Prog Source
I would recommend these settings for USB based power.
J15 - 5V
J11 - USB
J12-J14 - USB
Please can you confirm that all the following jumpers are connected horizontally and also let us know what positions they are in?
J15 Target Voltage
J11 Voltage Source
J12-J14 Prog Source
I would recommend these settings for USB based power.
J15 - 5V
J11 - USB
J12-J14 - USB
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 24
- Joined: Wed Apr 29, 2015 4:49 pm
- Has thanked: 5 times
- Been thanked: 5 times
- Contact:
Re: EB 006 Version 9
Hi,
Thank you for the fast response. Using USB-Power does not work either. I now solved the problem myself. When I feed in 5V directly (after the regulator) everything works fine. The board is simply not ok.
Thank you for the fast response. Using USB-Power does not work either. I now solved the problem myself. When I feed in 5V directly (after the regulator) everything works fine. The board is simply not ok.
-
- Posts: 29
- Joined: Wed May 07, 2008 3:41 pm
- Location: lincoln
- Been thanked: 3 times
- Contact: