Mifare RC522 RFID
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Mifare RC522 RFID
Hi!
Do I have a very urgent RC522 component of the macro.
http://www.ebay.com/sch/sis.html?_nkw=M ... 7675.m4099
If this is not possible, which is compatible with the RFID reader RFID components v6 Flowcode macros?
It would be very important!
Do I have a very urgent RC522 component of the macro.
http://www.ebay.com/sch/sis.html?_nkw=M ... 7675.m4099
If this is not possible, which is compatible with the RFID reader RFID components v6 Flowcode macros?
It would be very important!
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Hello,
The Flowcode RFID component is compatible with these modules.
http://www.rfsolutions.co.uk/acatalog/i ... ICODE.html
Saying this I have done some work with the RC522 module so I'll have trawl through and see if I can find it.
The Flowcode RFID component is compatible with these modules.
http://www.rfsolutions.co.uk/acatalog/i ... ICODE.html
Saying this I have done some work with the RC522 module so I'll have trawl through and see if I can find it.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Mifare RC522 RFID
Hello,
Benj Thank you!
Unfortunately, these modules are not available to me.
As you can tell processed by a micro controller chip serial data and builds up in the RFID chip transceiver protocol.
Benj Thank you!
Unfortunately, these modules are not available to me.
As you can tell processed by a micro controller chip serial data and builds up in the RFID chip transceiver protocol.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Hello,
It took me a while but I eventually managed to find it. Could probably be wrapped up into a component without too much effort.
It took me a while but I eventually managed to find it. Could probably be wrapped up into a component without too much effort.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 502
- Joined: Wed Nov 07, 2007 6:51 pm
- Location: Antwerp Belgium
- Has thanked: 121 times
- Been thanked: 108 times
- Contact:
Re: Mifare RC522 RFID
Would be great!Benj wrote:Hello,
Could probably be wrapped up into a component without too much effort.
Thank you BenJ
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Mifare RC522 RFID
Hi Stibor!
Very interesting. Please let us hear your test result.
Bet regard
Jorgen
Very interesting. Please let us hear your test result.
Bet regard
Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Mifare RC522 RFID
Hi Stibor!
Very interesting. Please let' s hear hear your test and result.
Best regard
Jorgen
Very interesting. Please let' s hear hear your test and result.
Best regard
Jorgen
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Mifare RC522 RFID
Hello!
The card recognition okay.
The ID readout is not working.
What is bad?
The card recognition okay.
The ID readout is not working.
What is bad?
- Attachments
-
- RFID_MFRC522.fcpx
- (5.12 KiB) Downloaded 747 times
-
- Flowcode1.fcfx
- (9.77 KiB) Downloaded 738 times
-
- rfid_disp.jpg
- (79.9 KiB) Downloaded 17272 times
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Mifare RC522 RFID
Hi.again!
The reconition and the ID is that not the same? And what is the nummer i your display? Is it those Wich not is correct?
BR
Jorgen
The reconition and the ID is that not the same? And what is the nummer i your display? Is it those Wich not is correct?
BR
Jorgen
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Hello,
Yes I can create a component if all is well, if there are problems then lets try and get them fixed first.
Can you tell me what you think is wrong with the IR readout?
Yes I can create a component if all is well, if there are problems then lets try and get them fixed first.
Can you tell me what you think is wrong with the IR readout?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Mifare RC522 RFID
Hello!
The problem was that for the first time generated component, and the component was tested.
I tried the MFRC522.fcf your program, this data has come.
The problem is that the data is the same as two RFID card.
Every time you turn on changes to the data read from the seventh.
This picture shows a value of 15. But was 48, 0, 78.
The problem was that for the first time generated component, and the component was tested.
I tried the MFRC522.fcf your program, this data has come.
The problem is that the data is the same as two RFID card.
Every time you turn on changes to the data read from the seventh.
This picture shows a value of 15. But was 48, 0, 78.
- Attachments
-
- MFRC522_rec.jpg
- (46.1 KiB) Downloaded 17078 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Hello,
So the data read back from the module changes every time you power up the module is that right?
Also the data read back from different RFID tags are the same?
Have you compared my code to any existing code? I created this code a few years ago and can't remember the status it was left in though I'm pretty sure it should work.
I'll go back through my emails to see if I can find more info.
So the data read back from the module changes every time you power up the module is that right?
Also the data read back from different RFID tags are the same?
Have you compared my code to any existing code? I created this code a few years ago and can't remember the status it was left in though I'm pretty sure it should work.
I'll go back through my emails to see if I can find more info.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Mifare RC522 RFID
Hello,
1. Power Card Recognition (yes / no) okay.
2. Data readout: changing the read data and then stops at a value.
3. The same data read all card.
I tried an Arduino library.
The same hardware (mega2560), the same electrical connections.
Arduino works by example.
Arduino lib:
https://github.com/miguelbalboa/rfid
1. Power Card Recognition (yes / no) okay.
2. Data readout: changing the read data and then stops at a value.
3. The same data read all card.
I tried an Arduino library.
The same hardware (mega2560), the same electrical connections.
Arduino works by example.
Arduino lib:
https://github.com/miguelbalboa/rfid
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Mifare RC522 RFID
Hi Ben and Stibor!
I found this project very interesting and usefull. (I have a look here every day)
Should it be possible to write new ID to the Card/tag also, or this is maybe not posiible to change .?
So (kindly) ask, does the tread stop here as I understand on Stibor there are still bugs?
BR
Jorgen.
I found this project very interesting and usefull. (I have a look here every day)
Should it be possible to write new ID to the Card/tag also, or this is maybe not posiible to change .?
So (kindly) ask, does the tread stop here as I understand on Stibor there are still bugs?
BR
Jorgen.
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Mifare RC522 RFID
Hello!
I tested Arduino Mega 2560, it was not good.
Unfortunately, I do not know what can be a problem.
Each RFID card given the same ID.
I read the UID would be enough.
I tested Arduino Mega 2560, it was not good.
Unfortunately, I do not know what can be a problem.
Each RFID card given the same ID.
I read the UID would be enough.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Hello,
I'll see if I can find some time this week to go back over the code and check it for bugs. We are pretty busy at the minute so may not get onto it this week but I will try. If it falls off my radar then feel free to pester me, I'm juggling a lot of things this week and my brain can only store so much
I'll see if I can find some time this week to go back over the code and check it for bugs. We are pretty busy at the minute so may not get onto it this week but I will try. If it falls off my radar then feel free to pester me, I'm juggling a lot of things this week and my brain can only store so much
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Mifare RC522 RFID
Hi Ben!
Ok Ben thanks for answers. We can well imagine you are in a hurry. we must have patience.
But we chasing you if going for a long time
BR
Jorgen
Ok Ben thanks for answers. We can well imagine you are in a hurry. we must have patience.
But we chasing you if going for a long time
BR
Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Mifare RC522 RFID
Hi Ben!
I dare to ask Have you found some time for this issue please.
I am very curious and find the project very interesting, and I will Invest in some of these module if they can work with Flowcode.
Best regard
Jorgen..
I dare to ask Have you found some time for this issue please.
I am very curious and find the project very interesting, and I will Invest in some of these module if they can work with Flowcode.
Best regard
Jorgen..
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Hello Jorgen,
I'll have a look but that Arduino library is looking even more unreadable then I last remember it. The code has changed significantly so it looks like we have to do a lot to catch up again.
I'll see how I get on and let you know.
I'll have a look but that Arduino library is looking even more unreadable then I last remember it. The code has changed significantly so it looks like we have to do a lot to catch up again.
I'll see how I get on and let you know.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Mifare RC522 RFID
Right I have spent a few hours on this now and it seems the further down the rabbit hole I go the more lost I get. The library is obviously written in a slightly obfuscated way and seems pretty horrible to follow through.
Anyway this is going to take some time to do properly.
Keep pestering me and I will keep trying to move this forward.
Anyway this is going to take some time to do properly.
Keep pestering me and I will keep trying to move this forward.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 502
- Joined: Wed Nov 07, 2007 6:51 pm
- Location: Antwerp Belgium
- Has thanked: 121 times
- Been thanked: 108 times
- Contact:
Re: Mifare RC522 RFID
You've asked for it...Benj wrote: Keep pestering me and I will keep trying to move this forward.