Hi!
I'm struggling to write a PIC 18F67K22 with FC and EBLOCK EB006 and I get the error:
Can you help me with a solution?
Thanks!
18F67K22 EB006
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: 18F67K22 EB006
Hello,
The EB006 does not support the 18F67K22 chip directly.
You may be able to program the chip using a PICkit 3 or 4 programmer connected to the ICSP header on the EB006 board.
The EB006 does not support the 18F67K22 chip directly.
You may be able to program the chip using a PICkit 3 or 4 programmer connected to the ICSP header on the EB006 board.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: 18F67K22 EB006
I have a pickit 3, but I do not find in the list of microcontrollers 18F67K22 in the standalone pickit 3 application for windows, although in the PicKit 3 datashhet is listed as supported 18F76K22.
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: 18F67K22 EB006
Hi
you have to install MPLABX which also install the IPE programming tool for PICkit 3 ,are you aware that you can directly program from FC with the PICKit 3 see this document
https://www.matrixtsl.com/wikiv7/index. ... _.28NEW.29
also see this post some very relevant info there
viewtopic.php?f=76&t=21704
you have to install MPLABX which also install the IPE programming tool for PICkit 3 ,are you aware that you can directly program from FC with the PICKit 3 see this document
https://www.matrixtsl.com/wikiv7/index. ... _.28NEW.29
also see this post some very relevant info there
viewtopic.php?f=76&t=21704
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR