Problem:
When testing ssd1306(i2c) with Uno in FC8 I noticed that graphics have been displayed OK, but not the text or numbers.
Used:
UnoR3_smd(Chinese), ssd1306(128x64).
File: attached example of FC8_ssd1306_1.
FC8 compilation: no errors.
Programmer: STK-600
What is done
Uno board changed to a new one: the same result
ssd1306 changed to a new one: the same result
Tested with Arduino IDE - OK
Any help please?
ssd1306 text problems (circle-OK)
Moderator: Benj
-
- Posts: 342
- Joined: Fri Jan 26, 2018 12:30 pm
- Location: South Australia
- Has thanked: 44 times
- Been thanked: 60 times
- Contact:
ssd1306 text problems (circle-OK)
- Attachments
-
- Circle_square_text.fcfx
- (9.26 KiB) Downloaded 205 times
-
- ide_1.jpg (36.78 KiB) Viewed 2821 times
-
- fc8-1.jpg (33.59 KiB) Viewed 2821 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: ssd1306 text problems (circle-OK)
Hello,
This is a problem that I believe has already been fixed. Please use the Help -> Check for updates feature and this should provide you with a new LUT component that should solve the problem for you.
Let us know how you get on.
This is a problem that I believe has already been fixed. Please use the Help -> Check for updates feature and this should provide you with a new LUT component that should solve the problem for you.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel