Hello,
I can connect the bluetooth eb024 board to the pic eb006 programmer (port C of the pic16F877a). With my PC and hyperterminal i can make a communication with ther eb024. It's work fine.
I have try to connect the EB024 board to the D port connector (pic18F4455) of the formula flowcode in order to remote control the robot but the bluetooth communication doesn't work.
Can you help me ?
Thanks
Romain (France)
Formula flowcode and Bluetooth EB024 Next Step
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Formula flowcode and Bluetooth EB024 Next Step
Hello Romain
The Bluetooth E-Block uses the hardware UART by default which on the 18F4455 is connected to PortC pins 6 and 7. You can implement the bluetooth to be driven from PortD by going into the Bluetooth firmware driver and changing the hardware UART to a bitbanged software UART and also changing the other interface I/O pins to match. I know there is an example on Youtube of this working so if you contact the video author he may be able to help out with the code conversion.
The Bluetooth E-Block uses the hardware UART by default which on the 18F4455 is connected to PortC pins 6 and 7. You can implement the bluetooth to be driven from PortD by going into the Bluetooth firmware driver and changing the hardware UART to a bitbanged software UART and also changing the other interface I/O pins to match. I know there is an example on Youtube of this working so if you contact the video author he may be able to help out with the code conversion.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Formula flowcode and Bluetooth EB024 Next Step
Hi roman
did your program eventualy work?
because i need to make the program for my school exam and i don't know how to begin with it.
so would you like to send my your program so i can see how i need to begin on it?
that would be a great help for my.
my e-mail is boemer8@msn.com
thanks in advance
did your program eventualy work?
because i need to make the program for my school exam and i don't know how to begin with it.
so would you like to send my your program so i can see how i need to begin on it?
that would be a great help for my.
my e-mail is boemer8@msn.com
thanks in advance