Helo!
I have some problem, with HP488 (v3) devboard under vista.
Vista recognise the hardware, and I can install the driver too, wheb I connect tha board, I hear the standard vista sound, witch means USB device connected.
But when I start PPP (newest) it said "USB not connected".
Undex WinXP works perfect.
How can I workaround this problem?
Thnaks for help.
Vista problems
-
- Posts: 8
- Joined: Mon Jul 16, 2007 9:07 pm
- Location: Hungary
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello
Yes this is a Vista problem. Fortunatley there is a work around.
Right click on Computer and goto properties.
Click On Device manager.
Goto Unversal Seral Bus Devices and double click it to open the contents.
Double click on the Matrix USB Development Board.
Click on the Power management tab.
Untick the box that says "Allow this device to be powered down"
Click OK and the development board should now be working correctly again.
Yes this is a Vista problem. Fortunatley there is a work around.
Right click on Computer and goto properties.
Click On Device manager.
Goto Unversal Seral Bus Devices and double click it to open the contents.
Double click on the Matrix USB Development Board.
Click on the Power management tab.
Untick the box that says "Allow this device to be powered down"
Click OK and the development board should now be working correctly again.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 8
- Joined: Mon Jul 16, 2007 9:07 pm
- Location: Hungary
- Contact: