Best CAN users or canOpen users,
I am trying to connect some bosch SB23 hydraulic valves to my ucontroller pic 18f458.
I know that the bosch valve is working with can iso 11898.
By looking at the internet it is a canOpen controlled valve.
Has somebody already have more experience with canopen.?
somebody at internet has written in a document that i also have to download an object library of can 2.0 with pod and first start in the pre operational can mode.
does somebody know more of this standard canopen??
thanks in advance
puts johan
belgium
PIC 18F458 CAN BUS
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PIC 18F458 CAN BUS
Hello Johan,
I've never used CANopen but I am assuming it is simply a protocol that is stuck ontop of the standard CAN messaging system. You should be able to hack your way in by following the standard message formats used in CANopen and replicating these with Flowcode component macro calls.
I've never used CANopen but I am assuming it is simply a protocol that is stuck ontop of the standard CAN messaging system. You should be able to hack your way in by following the standard message formats used in CANopen and replicating these with Flowcode component macro calls.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: PIC 18F458 CAN BUS
Benj wrote:Hello Johan,
I've never used CANopen but I am assuming it is simply a protocol that is stuck ontop of the standard CAN messaging system. You should be able to hack your way in by following the standard message formats used in CANopen and replicating these with Flowcode component macro calls.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PIC 18F458 CAN BUS
Hello,
Looking a bit deeper it looks like CAN open is just a way of defining what the information in the message ID and data bytes is assigned to.
http://en.wikipedia.org/wiki/CANopen
The page above has some good information.
Looking a bit deeper it looks like CAN open is just a way of defining what the information in the message ID and data bytes is assigned to.
http://en.wikipedia.org/wiki/CANopen
The page above has some good information.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel