Hello!
Can anyone tell me how the Custom Component(v1.0) works? If i use this i can choos between 4 Functions (Fuct1-4). There is no help (not in english or german) .
I want to convert Values for output on an 7 Seg. Display. Can i use this component for this requirement
Thanks a lot for help!
J. Schol
Custom Component
-
- Posts: 12
- Joined: Sat Sep 15, 2007 11:40 pm
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Custom Component
Hello
Yes you can use the custom component to provide that functionality,
More information on the custom component can be found here.
http://www.matrixmultimedia.com/Flowcode_Components.php
Yes you can use the custom component to provide that functionality,
More information on the custom component can be found here.
http://www.matrixmultimedia.com/Flowcode_Components.php
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 12
- Joined: Sat Sep 15, 2007 11:40 pm
- Contact:
Re: Custom Component
Hey!
Thanks for help.
But, do i must change the custom_code.c File as the Manual shows?
Do i must change this File in even Project where i want use this Custom Component?
I don't know a lot about c. So i don't want change anything in that File. And, in the actual Version of Flowcode, there are 2 Custom Components!
Is there no other way to convert Values (like a Charset-Table)?
Ok, i can use the If-Then Icon, but thisi s not gentleman like, i think ... .
Thanks for help.
But, do i must change the custom_code.c File as the Manual shows?
Do i must change this File in even Project where i want use this Custom Component?
I don't know a lot about c. So i don't want change anything in that File. And, in the actual Version of Flowcode, there are 2 Custom Components!
Is there no other way to convert Values (like a Charset-Table)?
Ok, i can use the If-Then Icon, but thisi s not gentleman like, i think ... .
Greetings
J. Schol
J. Schol
Re: Custom Component
hi
I scripted a nice Perl script which takes care of all the settings you usually would have had to do by yourself. and there is also a small description of what is going on in this file with all the Macro* definitions. take a look in my sig and go to the Custom_Code. c help needed link. there you'll find the doc and the script.
I made a Custom Component file for each one of my projects to keep it simple and clean.
unfortunately you have to learn C if you want to use the Custom Component.
cheers,
nils
I scripted a nice Perl script which takes care of all the settings you usually would have had to do by yourself. and there is also a small description of what is going on in this file with all the Macro* definitions. take a look in my sig and go to the Custom_Code. c help needed link. there you'll find the doc and the script.
I made a Custom Component file for each one of my projects to keep it simple and clean.
unfortunately you have to learn C if you want to use the Custom Component.
cheers,
nils
Custom_Code.c help needed? -> http://tinyurl.com/2y2mzq
Flowchart high quality vector graphic output =>>http://tinyurl.com/6sx2sx
Flowchart high quality vector graphic output =>>http://tinyurl.com/6sx2sx