lcd
lcd
I have flowcode 3 i dont know how to display true voltage on lcd / All i can get is the adc value ie 255 how do i change it to display 12 volts for example can anybody help me please
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: lcd
Hello
Please refer to this post.
http://www.matrixmultimedia.com/mmforum ... =22&t=6652
Flowcode 4 does the functionality you require by default, in V3 you are better off creating a look up table.
There is an example of how to do this in the articles section of the forum.
Please refer to this post.
http://www.matrixmultimedia.com/mmforum ... =22&t=6652
Flowcode 4 does the functionality you require by default, in V3 you are better off creating a look up table.
There is an example of how to do this in the articles section of the forum.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel