Hi,
After updating Flowcode (for PIC) to 3.6.11.53 using the 3.4/3.5 updater code using the USB Slave component does not compile. The error is caused by a typo on line 375 of USBDlave_code.c, it reads '#els' and should be '#else'.
Best regards,
Jac
Error in USBSlave_code.c after update to v3.6.11.53
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Error in USBSlave_code.c after update to v3.6.11.53
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- Steve
- Matrix Staff
- Posts: 3422
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Error in USBSlave_code.c after update to v3.6.11.53
Hi Jac,
Thanks very much for spotting this. I hope it did not cause you too much of a headache!
I'll make sure there is an FAQ put up about this.
Thanks very much for spotting this. I hope it did not cause you too much of a headache!
I'll make sure there is an FAQ put up about this.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Error in USBSlave_code.c after update to v3.6.11.53
Hello Jac
Sorry about this. I have now fixed all three sets of files to allow the components to work correctly. The problem only appears when the enumertaion wait setting is activated inside the USB component.
Details can be found here on our FAQ.
http://www.matrixmultimedia.com/support ... .php?t=548
Sorry about this. I have now fixed all three sets of files to allow the components to work correctly. The problem only appears when the enumertaion wait setting is activated inside the USB component.
Details can be found here on our FAQ.
http://www.matrixmultimedia.com/support ... .php?t=548
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel