rs232, 9th bit data not sending??
Moderator: Benj
rs232, 9th bit data not sending??
hi, in flowcode5, i want to develop RS485 application. On master side when i try to send slave ID + Read (0x101) using 9th bit transmission mode, but master only send "01" to slave not "101", how can i solve it..
- Attachments
-
- MasterNode.fcf
- (9.5 KiB) Downloaded 288 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: rs232, 9th bit data not sending??
Hello,
I've looked at the v5 code and it appears to be ok.
You could maybe check the register bits to make sure that the 9-bit data mode is enabled and that the 9th bit is being loaded into the correct register.
I've looked at the v5 code and it appears to be ok.
You could maybe check the register bits to make sure that the 9-bit data mode is enabled and that the 9th bit is being loaded into the correct register.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel