Hi guys
so i come back from holiday, and i take a look of the exemple from Benj
i'm ok with the voltage but i read back the instruction of the professor and it will be a bit more complicated
i give u an extract of :
" Converter and distributor of energy " 1-Role and description of the block
This block allows to load the battery, to feed the various functions and to supply certain sizes measured to the block " micro-programmed system ".
It realizes the transfer of energy between the photovoltaic panel, the load and the battery.
It measures:
-the tension and the current of entrance so that the microcontroller can determine the optimal point of power of the generator voltaic photo (Ve, Ie).
-the tension and the current of exit of the converter (Vs, Is).
-the current feeding all the electronic boards of the system (running in the load (Ic).
The current circulating in the battery (Ibat) will be calculated by the microcontroller from the moderate currents previously. "
sorry for the possible bad translation , don't hesitate to ask me
thanks in advance
![Very Happy :D](./images/smilies/icon_biggrin.gif)