Hello,
I wanted to find out if it is possible to communicate between two microcontroller using the I2C data transfer method, Master / Slave, if is no clue about C language?
Thank
I2C slave
Moderator: Benj
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: I2C slave
Hello,
This forum topic may be what your looking for.
http://www.matrixmultimedia.com/mmforum ... 81&p=17145
This forum topic may be what your looking for.
http://www.matrixmultimedia.com/mmforum ... 81&p=17145
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: I2C slave
Unfortunately, the C language I do not understand and I do not readily translate code for AVR, time to look for another variant.
Re: I2C slave
Hi,
Searching for other options I found a "High Speed CAN-Transceiver" "IFX1050G" http://catalog.gaw.ru/project/download.php?id=42566
The question is or the IFX1050G chip it is possible to communicate between 3 micro-controller via RS232 data transfer method?
Thanks.
Searching for other options I found a "High Speed CAN-Transceiver" "IFX1050G" http://catalog.gaw.ru/project/download.php?id=42566
The question is or the IFX1050G chip it is possible to communicate between 3 micro-controller via RS232 data transfer method?
Thanks.