ecio-40pin

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Post Reply
saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Has thanked: 1 time
Been thanked: 26 times
Contact:
Contact saschech@gmx.de

ecio-40pin

Post by saschech@gmx.de »

Hallo together
Where i can download the electrical-diagram of the ecio-40pin?
The port c-3 is not connected in flowcode,on the board i dont find c-4 and c-5...

Regards wolfgang
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: ecio-40pin

Post by Benj »

Hello

The datasheet can be found here.
http://www.matrixmultimedia.com/datashe ... O-60-2.pdf

Pins C3, C4 and C5 are used by the USB connection and are therefore not available.
Top
saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Has thanked: 1 time
Been thanked: 26 times
Contact:
Contact saschech@gmx.de

Re: ecio-40pin

Post by saschech@gmx.de »

Hallo

This one i have before.I mean a "Schaltplan" chematic.

Can i use the green LED in my code?

Regards wolfgang
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: ecio-40pin

Post by Benj »

Hello Wolfgang

The LED is connected to pin RE2. You should be able to use it in your code with no problems.
Top
Post Reply

Return to “Flowcode V2 & V3”